< Omron Microscan E2E-X10B1D30-M1 – High-Mark Automation
E2E-X10B1D30-M1

E2E-X10B1D30-M1

Omron Microscan
$92.00
$92.00
Sold out
Shipping calculated at checkout.
    • Stock Status : Stock
    • New Product : No
    • Type : Inductive Proximity Sensor; 3-wire DC; M30; Sn=10 mm; Shielded; PNP; NO; COM2; Short Body
    • Special function : 1x standard IEC sensing distance
    • Size : M30
    • Sensing Range : 1x
    • Long/Short Body : Short
    • Sensing Distance : 10 mm
    • Shielded : Shielded
    • Connection : M12 4-pin connector
    • Output : PNP
    • Operation : NO
    • Supply type : 3-wire DC
    • Supply voltage : 10 to 30 VDC
    • Case material : Nickel-plated brass
    • Sensing Surface Material : Polybutylene terephthalate (PBT)
    • Threaded length (mm) : 39
    • Overall length (mm) : 58
    • IP67 : IP67
    • IP67G : No
    • IP69K : IP69K
    • IO-Link : COM2
    • Detectable object : Ferrous metal (The sensing distance decreases with non-ferrous metal.)
    • Standard sensing object : Iron, 30 × 30 × 1 mm
    • Response frequency : 400 Hz
    • Current consumption : 16 mA max
    • Protection circuits : Power supply reverse polarity protection, Surge suppression, Output short-circuit protection, Output reverse polarity protection
    • Ambient temperature range : Operating/Storage: -40°C to 85°C (with no icing or condensation) Note: The UL temperature rating for M12 Pre-wired Connector Models is -25°C to 70°C.
    • Ambient humidity range : Operating/Storage: 35% to 95% (with no icing or condensation)
    • Temperature influence : ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C; ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
    • Voltage influence : ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
    • Insulation resistance : 50 MΩ min. (at 500 VDC) between current carry parts and case
    • Dielectric strength : 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
    • Vibration resistance : 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
    • Shock resistance : 1,000 m/s2, 10 times each in X, Y and Z directions
    • Degree of protection : Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 Part9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART(): IP69K
    • Certifications : UL (UL60947-5-2), CSA (CAS C22.2 UL60947-5-2-14), CE
    • Weight (packed state) : Approx. 160 g
    • IO-Link specification : Ver 1.1
    • Baud rate : 38.4 kbps
    • Data length : PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
    • Minimum cycle time : 2.3 ms
    • Main IO-Link Functions : Operation mode switching between NO and NC; self diagnosis enabling; excessive proximity judgement distance sensing; timer function of the control output and timer time selection; instability output (IO-Link mode) ON delay timer time selection function; output monitor; operating hours readout; sensor internal temperature readout; initial reset
    • Range : x1