< Omron Microscan E2E-X9B1D12-M1 – High-Mark Automation
E2E-X9B1D12-M1

E2E-X9B1D12-M1

Omron Microscan
$108.00
$108.00
Sold out
Shipping calculated at checkout.
  • Stock Status : Stock
  • New Product : No
  • Type : Inductive Proximity Sensor; 3-wire DC; M12; Sn=9mm; Shielded; PNP; NO; COM2; Short Body
  • Special function : 4x standard IEC sensing distance
  • Size : M12
  • Sensing Range : 4x
  • Long/Short Body : Short
  • Sensing Distance : 9 mm
  • Shielded : Shielded
  • Connection : M12 4-pin connector
  • Output : PNP
  • Operation : NO
  • Supply type : 3-wire DC
  • Supply voltage : 10 to 30 VDC
  • Case material : Nickel-plated brass
  • Sensing Surface Material : Polybutylene terephthalate (PBT)
  • Threaded length (mm) : 28
  • Overall length (mm) : 48
  • IP67 : IP67
  • IP67G : No
  • IP69K : IP69K
  • IO-Link : COM2
  • Detectable object : Ferrous metal (The sensing distance decreases with non-ferrous metal.)
  • Standard sensing object : Iron, 27 x 27 x 1 mm
  • Response frequency : 700 Hz
  • Current consumption : 16 mA max
  • Protection circuits : Power supply reverse polarity protection, Surge suppression, Output short-circuit protection, Output reverse polarity protection
  • Ambient temperature range : Operating/Storage: -25°C to 70°C (with no icing or condensation)
  • Ambient humidity range : Operating/Storage: 35% to 95% (with no icing or condensation)
  • Voltage influence : ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
  • Insulation resistance : 50 MΩ min. (at 500 VDC) between current carry parts and case
  • Dielectric strength : 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
  • Vibration resistance : 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
  • Shock resistance : 1,000 m/s2, 10 times each in X, Y and Z directions
  • Degree of protection : Pre-wired Models, Pre-wired Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 Part9): IP69K, JIS C 0920 Annex 1: IP67G, Passed OMRON's Oil-resistant Component Evaluation Standards (Cutting oil type: specified in JIS K 2241: 2000; Temperature: 35°C max.) Connector Models: IEC 60529: IP67, ISO 20653 (old standard: DIN 40050 PART(): IP69K
  • Certifications : UL (UL60947-5-2), CSA (CAS C22.2 UL60947-5-2-14), CE
  • Weight (packed state) : Approx. 55 g
  • IO-Link specification : Ver 1.1
  • Baud rate : 38.4 kbps
  • Data length : PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
  • Minimum cycle time : 2.3 ms
  • Main IO-Link Functions : Operation mode switching between NO and NC; self diagnosis enabling; excessive proximity judgement distance sensing; timer function of the control output and timer time selection; instability output (IO-Link mode) ON delay timer time selection function; output monitor; operating hours readout; sensor internal temperature readout; initial reset
  • Range : x4