Adding product to your cart
- Stock Status : Stock
- New Product : No
- Type : 1.5MM SD, 8 X 5.5 X 25MM
- Special function : Standard Flat Inductive Prox Sensor
- Size : 5.5 x 8 x 27 mm
- Sensing Distance : 1.5 mm
- Shielded : Unshielded
- Connection : PVC cable
- Output : NPN
- Operation : NO
- Supply voltage : 12 to 24 VDC
- Case material : Heat-resistant ABS
- Threaded length (mm) : Does not apply, rectangular shape
- Overall length (mm) : Does not apply, rectangular shape
- Mounting : Mounts with a bracket or to a flat surface with an M3 screw
- Detectable object : Ferrous metal (The sensing distance decreases with non-ferrous metal.)
- Standard sensing object : Iron, 8 × 8 × 1 mm
- Response frequency : 1 kHz min
- Current consumption : 15 mA max. at 24 VDC (no-load)
- Protection circuits : Reverse polarity protection, Surge suppressor
- Ambient temperature range : Operating/Storage: −25 to 70°C (with no icing or condensation) *
- Ambient humidity range : Operating/storage: 35% to 95% (with no condensation)
- Temperature influence : ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C
- Voltage influence : ±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
- Insulation resistance : 50 MΩ min. (at 500 VDC) between current-carrying parts and case
- Dielectric strength : 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
- Vibration resistance : 10 to 55 Hz, at 1.5 mm in X, Y, and Z directions, double amplitude for 2 hours
- Shock resistance : Destruction: 500 m/s2 10 times each in X, Y, and Z directions
- Degree of protection : IEC 60529 IP67, in-house standards: oil-resistant *
- Weight (packed state) : Approx. 30 g
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
